Speakers Categories
Speakers
Showing all 34 results
-
Full-Range & Mid-Range
Avante A15 speaker
- PEAK PERFORMANCE PA SYSTEM: Project crisp, clear sound with a highly powered 1200W Dynamic, 350W Class D (LF) and 50W Class AB (HF) Amplification Power, 45hz-20kHz Frequency Range and 90 x 60 degree nominal coverage.
- ADJUSTABLE POLE MOUNT: A uniquely designed pivot switch allows you to easily tilt without dismounting and reattaching. Tilt at 0 Degrees or 7.5 degrees for clear projection.
- INTEGRATED SOUND PROCESSOR: Switch through present controls to create optimal sound performance in Live, Club, and Speech Modes. Navigate Location, Trebel, and Bass with easy to ready displays and manual dials.
- HEAVY-DUTY TRANSPORTABLE DESIGN: With two built-in handles for transport and a tough and durable 1.2mm steel grill and H-PP molded enclosure this professional sound system is able to withstand wear and tear from travel.
- PRODUCT SPECIFICATIONS: 124 dB peak SPL output at 1M, 15″ woofer with 2.5-inch voice coil and 1.35-inch HF Compressor Driver, Balanced XLR In/Out and 2 RCA inputs, 2 top and 1 back M10 fly points, 120V/240V, 50/60Hz Power Input, 400W Consumption, 28.7”x 16.7”x 16.3”, 42 lbs.
SKU: Avante15 -
Column Arrays, Live Gear, Sub-Woofer Speakers
Avante Achromic AS8 Speaker
The fully-featured and easy to setup Achromic AS8 system comprises an active 8-inch sub-woofer enclosure alongside two column units. One is loaded with six precision-aligned 2.75” speaker cones while the other serves as a spacer to lift the speaker column up to optimal height. Both feature Avante’s new SAM (Secure Array Mount) system which allows the columns to lock securely to the sub and to one another without risk of being toppled over. The SAM connection also passes the audio signal from the sub up to the columns, removing the need for speaker cables, and allows the main column to connect directly to the sub without using the spacer if required, ideal for performances from a high stage.
SKU: AVANTE AS8 -
Full-Range & Mid-Range, Live Gear
Avante Audio A10 Speaker
• Amp Power: 1000W Peak; 250W Class D (LF) + 50W Class AB (HF) RMS
• Built-in Digital Signal Processing (DSP) with LCD screen, EQ & multiple presets
• Frequency Range: 70hz-20kHz
• Output (Peak SPL @ 1m): 121dB
• Nominal Coverage: 90˚ x 60˚
• Drivers: 10-inch woofer with 2-inch voice coil + 1-inch HF Compression Driver
• Inputs: Balanced Female XLR ¼-inch combo jack, 2x RCA (phono)
• Output: Balanced Male XLR
• Enclosures: H-PP Molded
• Grill: 1.2mm Steel
• Handles: 1 on top
• Fly Points: 2 on top / 1 on back
• Pole Mounting: Dual position 0-degrees or 7.5-degrees
• Power Input: 115V/230V, 50/60Hz (country specific)
• Power Consumption: 400W
• Dimensions: 20.9”x12.2”x11.8” / 530x310x299mm
• Weight: 25 lbs. / 11.3 kg.
SKU: Avante A10 -
Full-Range & Mid-Range, Live Gear
Avante Audio A12 Speaker
? Amp Power: 1200W Peak; 350W Class D (LF) + 50W Class AB (HF) RMS
? Built-in Digital Signal Processing (DSP) with LCD screen, EQ & multiple presets
? Frequency Range: 60hz-20kHz
? Nominal Coverage: 90? x 60?
? Output (Peak SPL @ 1M): 123dB
? Drivers: 12-inch woofer with 2.5-inch voice coil + 1.35-inch HF Compression Driver
? Inputs: Balanced Female XLR ?-inch combo jack, 2x RCA (phono)
? Output: Balanced Male XLR
? Enclosures: H-PP Molded
? Grill: 1.2mm Steel
? Handles: 1 on top / 1 on side
? Fly Points: 2 on top / 1 on back
? Pole Mounting: Dual position 0-degrees or 7.5-degrees
? Power Input: 115V/60Hz or 240V/50Hz (country specific)
? Power Consumption: 400W
? Dimensions: 24.7?x14.4?x13.9? / 628x365x354mm
? Weight: 35 lbs. / 15.9 kg.
SKU: AVAA12 -
Full-Range & Mid-Range, Live Gear
Avante Audio A18S Speaker
- Amp Power: 1600W Peak; 500W RMS Class D amplifier
- Built-in Digital Signal Processing (DSP) with LCD screen, EQ & multiple presets
- Frequency Range: 35Hz-150Hz
- Nominal Coverage: Omni-direction, cardioid
- Output (Peak SPL @ 1M): 127dB
- Drivers: 18-inch woofer with 3-inch voice coil
- Inputs: 2x Balanced Female XLR ?-inch combo jack
- Outputs: 2x Balanced Male XLR
- Enclosures: 15mm Plywood
- Grill: 1.5mm Steel
- Handles: Two: 1 on each side
- Pole Mounting: Ground Stack (includes mounting pole)
- Power Input: 115V/60Hz or 240V/50Hz (country-specific)
- Power Consumption: 600W
- Dimensions: 26.1?x20.1?x25.5? / 662x510x647mm
- Weight: 73 lbs. / 33.1 kg
SKU: Avante Audio A18S -
New ProductFull-Range & Mid-Range, Live Gear
Avante Audio A18S Speaker (B-Stock)
- Amp Power: 1600W Peak; 500W RMS Class D amplifier
- Built-in Digital Signal Processing (DSP) with LCD screen, EQ & multiple presets
- Frequency Range: 35Hz-150Hz
- Nominal Coverage: Omni-direction, cardioid
- Output (Peak SPL @ 1M): 127dB
- Drivers: 18-inch woofer with 3-inch voice coil
- Inputs: 2x Balanced Female XLR ?-inch combo jack
- Outputs: 2x Balanced Male XLR
- Enclosures: 15mm Plywood
- Grill: 1.5mm Steel
- Handles: Two: 1 on each side
- Pole Mounting: Ground Stack (includes mounting pole)
- Power Input: 115V/60Hz or 240V/50Hz (country-specific)
- Power Consumption: 600W
- Dimensions: 26.1?x20.1?x25.5? / 662x510x647mm
- Weight: 73 lbs. / 33.1 kg
SKU: Avante Audio A18S (B-stock) -
Live Gear, Sub-Woofer Speakers
Avante Audio Imperio Speaker
- 2x 4.75″ Neodymium Woofer with 1-inch voice coil
- 6x 1.75″ IDVAT HF drivers (Inverted Dome Vertical Array Technology)
- Type: 2-Way Active Closed Design
- Frequency Response: 150Hz – 20KHz
- Impedance: 4 Ohm
- Max Output SPL: 117dB (single box measured on Axis @1m)
- Selectable Input Sensitivity: -3dB, 0dB, 3dB, 6dB
- Cabinet: ABS Plastic
- Grill: 1.0mm steel
SKU: IMP092 -
New ProductLine Arrays
Avante Audio Imperio SUB210
Speaker powered via 3-pin power Con input and output connectorsInternal selectable X-over 90 or 120 HzPhase Switchable (0 / 180°)LED power, signal, clip indicator124 dB max SPLFlyable with flybar (available separately)6th order bandpass design1.2mm steel grillPlywood cabinetVolume control dialSKU: IMPERIO SUB210 -
Live Gear, Sub-Woofer Speakers
Avante Imperio Sub
Avante Audio’s Imperio mini line array system is a great fit for small to mid-size venues. The Imperio system consists of the Imperio Sub, a 10-inch, 400W Subwoofer with a Class D digital amplifier, and the Imperio, a cabinet with dual 4.75-inch woofers, a 240W Class D power amplifier and 24-bit DSP. The system may be configured in a variety of ways with multiple Imperio Subs and 8 Imperio cabinets linked together with the sub on top or bottom. All items including the flybar are sold separately to allow for maximum customizability and versatility.
SKU: IMP400 -
Column Arrays
FBT CLA 206A Powered Speaker
Bi-amplified 2-way line array
2 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switching mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and anti-slip upper and lower
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws. New hardware for flying installations, for ground setups and the possibility of coupling two or more CLA 406A / CLA 206A with an angle of 0 – 20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined 20 degree to have maximum flexibility of use in combination with other CLA 206A or CLA 406A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in small point source systems with the CLA 118SA sub and in clusters of two to have a dispersion of 40 degree (V). It can also be considered a down-fill for CLA 406A systems.SKU: n/a -
Live Gear, Sub-Woofer Speakers
FBT CLA 208SA Powered Line Array Sub Speaker
High-level sound quality from 50Hz to 20kHz expressly developed for live performance
Long distance sound projection and better SPL distribution towards the audience
Great and dynamic power performance thanks to tri-amplification system
Lightweight and easy to carry
Design and elegance for an easy integration even in the most demanding installations
Very compact dimensions enable the listener to concentrate on sound and not on speakers!
High horizontal dispersionSKU: FBT CLA 208 SA -
Column Arrays, Live Gear
FBT CLA 406.2A Powered Speaker
Bi-amplified 2-way line array
4 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 degree H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0 degree-20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined by 10 degree to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill.SKU: FBT CLA 406.2A -
Column Arrays, Live Gear
FBT CLA 604A Powered Column Array Speaker
2-way passive column line array.
6 x 100mm (4?) custom woofer with 25mm (1?) voice coil.
4 x 25mm (1?) dome neodymium tweeter on a waveguide.
Frequency response from 130Hz to 20kHz.
100V transformer with 2 levels of power, 100 and 200W.
100?H x 20?V dispersion.
4-pole Euroblock input connector: 8ohm ? 100W/100V ? 200W/100V.
Extruded-aluminum powder-coated cabinets.
Wall-mount installation bars are supplied.
Expandable line array by adding CLA604 modules in order to increase SPL and reduce the vertical radiation lobe width.
Ideal for fixed installation in reverberant environments, it can improve both music and voice intelligibility by improving direct/ reflected sound quality.
Standard white finish RAL 9016.
EN 54-24 EC Certificate of Conformity.SKU: FBT CLA 604 A -
Full-Range & Mid-Range, Live Gear
FBT J12A Powered Speaker
320mm (12??) custom woofer with improved efficiency and linearity
25mm (1?) HF custom compression driver
90?H x 60?V constant directivity horn
2-way bi-amplified system in Bass-Reflex
350Wrms class D amplifier for LF and 100Wrms for HFSKU: FBT J 12A -
Full-Range & Mid-Range, Live Gear
FBT J15A Powered Speaker
2-way processed active system
Polypropylene enclosure
1 x 15″ custom woofer
1 x 1″ neodymium silk dome tweeter
300W/70W built-in amplifier cont. RMS LF/HF
350W/100W built-in amplifier max. RMS LF/HF
700W/200W built-in amplifier max. peak LF/HF
2 x M10 suspension points
4 DSPpresets
Completely manufactured in ItalySKU: FBT J15A -
Full-Range & Mid-Range, Live Gear
FBT J8A Powered Speaker
2-way bi-amplified system in Bass-Reflex2-way bi-amplified system in Bass-Reflex
Polypropylene enclosure with integrated handle except J 5A/5
2 x M10 anchoring points (15A, 12A, DJ 15A), 2 x M6 suspension points (8A, 5A)
25mm (1?) HF custom AF compression driver (15A, 12A, 8A, DJ 15A)
90?H x 60?V constant directivity horn (15A, 12A, 8A, DJ 15A)SKU: FBT J8AW -
Live Gear, Sub-Woofer Speakers
FBT Muse 118FSA
Compact Hybrid band pass cardioid-arrayable subwoofer.
Hybrid configuration permit to obtain extension and speed of vented with high SPL and acoustic filtering of band pass
Suspension hardware fully compatible with MUSE210La allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations.
Subwoofer can be suspended facing forward or rearward and user-configurable with capability of front or rear mounting the grille and amp module for aesthetic uniformity in cardioid configuration
Very large area laminar-flow port to ensure no power compression and very low port turbulence
For cardioid configurations with one SUB rear-firing and two sub front-firing, more than 15db SPL rejection can be obtained behind the array
18″ (460mm) custom B&C neodymium magnet high excursion woofer with 3″(75mm) voice coil
Frequency Response from 33Hz to 100Hz
Class D amplifier delivering 1200WRMS
135dB / 139dB SPL
Switch mode power supplySKU: FBT MUSE 118FSA -
Line Arrays, Live Gear
FBT Muse 210LA Powered Array Speaker
2-way, compact bass-reflex line array system
Two 250mm (10″) woofers with 64mm (2.5″) voice coils
Two custom B&C HF compression drivers with 25mm (1″) throats
Precision waveguide delivering 90? of horizontal dispersion up to 18Khz
Frequency response from 55Hz to 20KHz
Onboard Class-D bi-amp system delivering 600Wrms and 300Wrms for LF and HF with switch-mode power supplies
Onboard DSP processor with 8 EQ presets, adjustable HF level of +/- 5db for accurate amplitude shading
Control panel with XLR input and link, preset control, HF level control, HP-filter and ground lift
Strong birch plywood cabinet with integrated aluminum handles, hardware and fly-ware offering adjustable angling ranging from 0? to 10? in 1? increments
Wide range of accessories to offer ultimate flexibility no matter whether your MUSE line array system is suspended or ground-stacked, plus a specially designed cover to guard against bad weatherSKU: FBT MUSE 210 LA -
Full-Range & Mid-Range, Live Gear, Speakers, Studio Gear
FBT Promaxx 114A Powered Speaker
2-way, bi-amplified, bass reflex design cabinet
Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch mode power supplies
Digital signal processor with graphic display
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2 x M10 suspension points, 35 mm (1,3/8?) top-hat speaker stand socket, wall bracket mount flange plate
90?H x 60?V constant directivity horn
Front of House or Stage Floor Monitor: with 12?, 40? and 55? monitoring angles
3550mm (14″) LF woofer with 64mm (2.5″) voice coil, custom made for FBT
35mm (1.4″) throat exit B&C HF magnet compression driver with 34mm (1.4?) voice coil
Frequency response from 45Hz to 20KHz
Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
Extremely light only 17.4kg
Compact Dimensions: ProMaxX 114A uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112A, but features our 14? LF Woofer for lower frequency SPLSKU: PROMAXX114A -
Live Gear, Stage monitors
FBT STAGEMAXX 12MA
- StageMaxX 12Ma features a 12” B&C loudspeaker custom made for FBT and coaxially mounted with a B&C 1” exit throat compression driver.
- The coaxial configuration allows perfect alignment of the acoustic centers of the transducers, guaranteeing symmetry of dispersion and improving the focus of the stereo image in Left-Right configuration.
- Bi-amplification design with high dynamic Class D amplifiers delivering 400W + 100W RMS through a switch-mode power supply.
- Digital Signal Processor with 4 factory equalization presets provides simple and efficient EQ adjustment to optimize the acoustical response for different applications.
- The FOH preset allows the use of suspended installation as well as ‘drum fill’ applications.
- StageMaxX features two lateral M10 rigging points and a wall mounting bracket for different applications (optional accessories).
- 3 frontal status LED indicators to control the ON-OFF limiter and protection state.
- Three ergonomic integrated carrying handles, one frontally placed to easily drag and move the monitor on stage and the replaceable Teflon feet ensure sliding on stage with minimal wear.
- The cabinet has 35° or 55° tilted front panel for an optimal listening distance for a single user (35°) or for more users (55°).?
The 4 presets are:- ORIGINAL: is the typical “MaxX” sound adapted to the “STAGE” application
- HI-CUT / DRUM FILL: provides less mid-high for comfortable listening in near-field at a high level
- LO-CUT / DOUBLE: provides less low frequency for better intelligibility and for optimal coupling in a stereo configuration
- FOH: Front Of House use in suspended or pole-mount installations
400W + 100W RMS – 130dB SPL- 2-way, bi-amplified, bass reflex design cabinet
- Coaxial custom FBT 12” B&C speakers with 64mm (2.5”) voice coil
- B&C 25mm (1”) exit throat compression driver and 44mm (1.7”) voice coil
- Bi-amp: high dynamic Class D amplifiers 400W+100W RMS to provide a pleasant sound even at loud volume
- High-efficiency switch mode power supply
- Digital Signal Processor with 4 factory equalization presets
- Control Panel: XLR/Jack input and XLR link out, Volume, 4 Presets, HP Filter, 3 frontal status LED indicators
- 90° directivity horn
- Proprietary filtered algorithms, dynamic equalization at low frequencies, advanced energy control allows an high SPL while granting reliable and distortion-free audio reproduction with high headroom
- Sturdy gas-injected polypropylene molded enclosures to avoid undesired resonance
- Weather-resistant coating under the grill to protect the driver and the speaker
- High SPL in a compact size monitor
- 35° or 55° tilted front panel for an optimal listening distance for single or multiple users
- Three ergonomic integrated carrying handles, two M10 rigging points
- Teflon replaceable feet allow easy use on stage
SKU: FBT STAGEMAXX 12MA -
Column Arrays, Live Gear
FBT Vertus CS1000 Powered Speaker
- 2-way speaker system
- Subwoofer with a custom 12? (320mm) long excursion speaker with a 2.5? (64mm) voice coil
- 6 x full-range,? 3? (70mm) neodymium high-efficiency custom woofers with 0.75? (20mm) voice coils
- The frequency response of 40Hz to 20KHz
- Onboard Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively
- Built-in DSP with eight presets to suit every application
- Variable volume between -4.5 / + 5 dB in 8 steps
- Control Panel with master volume, presets, satellite volume, HPF, and LED status
- Input and link via XLR and Neutrik SPEAKON for satellite connection
- Dispersion 110 ? (H) x 30 ? (V)
- Modular design allowing two systems to be configured as one single solution via optional accessories
- Bass reflex stackable subwoofer in a birch plywood enclosure with diecast aluminum handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming
- The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation
- The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted.
- Ideal for both live applications and fixed installations
- Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side)
SKU: FBT CS 1000 -
-
Combos, Guitar Amplifier, Live Gear
Fender Mustang V Head V.2 Guitar Amp
One 1/4″ input
One channel with 100 presets
Gain, Volume, Treble, Middle, Bass, Reverb, Master, Stomp Edit, Modulation Edit, Delay Edit, Reverb Edit, Utility, Save, Exit and Tap/Tuner controls
Two XLR stereo outputs
Black textured vinyl covering with silver grille cloth
18 high-quality amp models including five new ones
New effects, including big fuzz, green screamer and intelligent pitch shifting
100 onboard factory and user presets
Blackface treatment and top-load front control panel
USB connectivity
Fender FUSE
Ableton Live Lite 8 Fender edition
AmpliTube Fender LE editionSKU: 2300500000 -
Combos, Guitar Amplifier, Live Gear
Fender Rumble 500 V3 Bass Amp
Practice privately with the 1/8″ headphone output jack that also mutes the speaker output.
Enjoy the peace of mind that this amp is backed by Fender’s 5 Year Transferable Warranty.
Expore bass tones from classic gritty growl to slap-worthy modern punch with the newly-developed overdrive circuit and switchable contour controls
A beefy 500 watt class D power amp and ported speaker enclosure pumps volume and deep bass response but keeps this amp very light in weight – only 36.5 pounds!
Jam along with your favorite tracks by simply plugging your MP3 player into the 1/8″ Auxiliary input jack and instantly become part of the band.SKU: n/a -
Line Arrays
Shure SE112
- Single dynamic driver delivers great sound performance in a discrete, durable design.
- Sound Isolating™ design featuring fit kit with a variety of sleeves blocks up to 37 dB of outside noise so you can hear the details of your music.
- Fixed cable design allows for earphones to be worn over the ear or hanging down for long-wearing comfort.
- Includes a carrying pouch and fit kit with selection of sleeves.
- Designed to withstand the rigors of live performance with two-year warranty.
SKU: SE112 -
Combos, Guitar Amplifier, Live Gear
Fender Acoustasonic 150 Combo, Brown
150W
2 – 8″ foam-surround low-frequency neodymium drivers
Two channels
1/4″ instrument and mic inputs
Instrument channel controls: Volume, Treble, Mid, Bass, Voicing Select, String Dynamics, FX Select, FX Level
Mic channel controls: Volume, Treble, Mid, Bass, Voicing Select, FX Select, FX Level
Stereo effects loop
Phantom-powered second mic input
Balanced line out with ground lift
Fender Tilt-Back legs
Lightweight 5-ply hardwood construction
Rich Fender acoustic tone plus features for tSKU: n/a -
-
Live Gear, Sub-Woofer Speakers
American Dj Sense 18B Subwoofer
ADJ’s Sense 18B Subwoofer has an 18-inch subwoofer and a 100mm voice coil. It was designed with a multi-functional speaker in a compact and lightweight speaker system to handle the demand of even the most ambitious sound systems. It is ideal for mobile and installed applications.
- Woofer: 18” AA PA18000, aluminum basket, 100mm Voicecoil
- Power Handling: 600W continuous, 1200W program, 2400W peak
- Recommended input power: 400-800 W @ 8Ohm
- Components: 18” Longexcursion woofer
- Sensitivity (Half Space): 103dB SPL, 136dB Peak
- Freq. response (-3dB): 42Hz – 200Hz
- Freq. range(-10dB): 36Hz – 250Hz
- Nom. dispersion h x v (-6dB): 908×608
- Impedance: 8Ohm
- Finish: black structure paint
- Protective Grid: powder coated steel grill with acoustic foam
- Connector: 2x Speakon connectors
- Handle: 2 handles on the sides
- Pole mount: integrated (M20)
- Cabinet: plywood
- Dimensions (LxWxH): 520x650x600mm
- Weight: 33kg
- Perfect matched components and enclosure details
- High efficiency
- First class mechanical manufacture for day-to-day operations
- Equipped with optimized 18” LF driver
- Large optional accessory range
- Ideal for mobile and install applications
SKU: n/a