Live Gear Categories
Live Gear
Showing 1–48 of 72 results
-
-
Light Mixers
American Dj Midicon 2
An updated design from the original MIDICON™ controller, the MIDICON-2™ features tactile spring loaded buttons, (1) master and (8) control 100mm faders, (16) playback page buttons above faders, (8) rotary dials with push-in selection above faders, a bank of (32) instant effects or scene calling buttons, (1) blackout button, (6) general purpose buttons for often used functions, (8) bump/momentary effect buttons, (4) rotary encoder wheels with push-in selection, USB input for a gooseneck work light (not included), removable outer case for rack mounting (rack mount kit included), and a Kensington™ security device slot.
SKU: n/a -
Atmospheric Effects
American Dj Entour Faze 450W Fog Machine
This 450W Faze Machine uses ADJ’s patent pending rapid heater technology that allows the machine to be ready to produce haze in 40 seconds from the time it’s turned on. This is done by the heater constantly reheating to a optimized temperature.
The Entour Faze can be operated by the faze trigger switch on the rear of the machine, the supplied Entour VT-1 wired remote or from a DMX controller. It has a large 3-liter tank that uses standard water based fog fluid.
The Entour Faze is portable and light in weight, but is rugged for everyday use. It creates a thin mist of atmospheric in the air,
without a large plume of smoke, to enhance light beams. It’s designed for permanent installs such as stages, nightclubs, churches and fun centers, or may be used on the road by mobile entertainers and event companies.
SKU: n/a -
-
Light Mixers
American Dj Wifly Battery
A true wireless solution! The ADJ WiFLY EXR Battery is a battery powered wireless DMX transceiver (transmitter/receiver in one) that is compatible with all ADJ WiFLY “EXR” products. After connecting the WiFLY EXR Battery transceiver to a DMX Controller users can send a constant and reliable wireless DMX signal up to 2500 feet to other ADJ WiFLY “EXR” products. This transceiver is backwards compatible with ADJ WiFLY products, however, it will only transmit up to 2500 feet with other “EXR” Extend Range products.
SKU: n/a -
Column Arrays, Live Gear, Sub-Woofer Speakers
Avante Achromic AS8 Speaker
The fully-featured and easy to setup Achromic AS8 system comprises an active 8-inch sub-woofer enclosure alongside two column units. One is loaded with six precision-aligned 2.75” speaker cones while the other serves as a spacer to lift the speaker column up to optimal height. Both feature Avante’s new SAM (Secure Array Mount) system which allows the columns to lock securely to the sub and to one another without risk of being toppled over. The SAM connection also passes the audio signal from the sub up to the columns, removing the need for speaker cables, and allows the main column to connect directly to the sub without using the spacer if required, ideal for performances from a high stage.
SKU: AVANTE AS8 -
Full-Range & Mid-Range, Live Gear
Avante Audio A12 Speaker
? Amp Power: 1200W Peak; 350W Class D (LF) + 50W Class AB (HF) RMS
? Built-in Digital Signal Processing (DSP) with LCD screen, EQ & multiple presets
? Frequency Range: 60hz-20kHz
? Nominal Coverage: 90? x 60?
? Output (Peak SPL @ 1M): 123dB
? Drivers: 12-inch woofer with 2.5-inch voice coil + 1.35-inch HF Compression Driver
? Inputs: Balanced Female XLR ?-inch combo jack, 2x RCA (phono)
? Output: Balanced Male XLR
? Enclosures: H-PP Molded
? Grill: 1.2mm Steel
? Handles: 1 on top / 1 on side
? Fly Points: 2 on top / 1 on back
? Pole Mounting: Dual position 0-degrees or 7.5-degrees
? Power Input: 115V/60Hz or 240V/50Hz (country specific)
? Power Consumption: 400W
? Dimensions: 24.7?x14.4?x13.9? / 628x365x354mm
? Weight: 35 lbs. / 15.9 kg.
SKU: AVAA12 -
Full-Range & Mid-Range, Live Gear
Avante Audio A18S Speaker
? Amp Power: 1600W Peak; 500W RMS Class D amplifier
? Built-in Digital Signal Processing (DSP) with LCD screen, EQ & multiple presets
? Frequency Range: 35Hz-150Hz
? Nominal Coverage: Omni-direction, cardioid
? Output (Peak SPL @ 1M): 127dB
? Drivers: 18-inch woofer with 3-inch voice coil
? Inputs: 2x Balanced Female XLR ?-inch combo jack
? Outputs: 2x Balanced Male XLR
? Enclosures: 15mm Plywood
? Grill: 1.5mm Steel
? Handles: Two: 1 on each side
? Pole Mounting: Ground Stack (includes mounting pole)
? Power Input: 115V/60Hz or 240V/50Hz (country specific)
? Power Consumption: 600W
? Dimensions: 26.1?x20.1?x25.5? / 662x510x647mm
? Weight: 73 lbs. / 33.1 kg
SKU: Avante Audio A18S -
-
Audio Accessories
Avante Imperio Linkpin4
Set of 4 linkpins for the Avante Imperio Series. Linkpins are used when flying Imperio system with Imperio subwoofer(s) and Flybar LG or to connect 2 subwoofers in ground stacking.
1 set of 4 pcs. needed for each connection (i.e. when flying 1 subwoofer with Imperio Top underneath, 2 Flybar Lg are needed, as well as 2 sets of LinkPin4. Add 1 set more if 2 subs are flown per side.
SKU: n/a -
Live Gear, Sub-Woofer Speakers
Avante Imperio Sub
Avante Audio’s Imperio mini line array system is a great fit for small to mid-size venues. The Imperio system consists of the Imperio Sub, a 10-inch, 400W Subwoofer with a Class D digital amplifier, and the Imperio, a cabinet with dual 4.75-inch woofers, a 240W Class D power amplifier and 24-bit DSP. The system may be configured in a variety of ways with multiple Imperio Subs and 8 Imperio cabinets linked together with the sub on top or bottom. All items including the flybar are sold separately to allow for maximum customizability and versatility.
SKU: IMP400 -
Live Gear, Mixers
Behringer Xenyx Mixer With Usb/Audio Interface
- Premium ultra-low noise, high headroom analog mixer
- 4 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
- 4 studio-grade compressors with super-easy “one-knob” functionality and control LED for professional vocal and instrumental sound
- Neo-classic “British” 3-band EQs with semi-parametric mid band for warm and musical sound
- New studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user parameter settings
SKU: n/a -
Column Arrays, Live Gear
FBT CLA 406.2A Powered Speaker
Bi-amplified 2-way line array
4 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 degree H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0 degree-20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined by 10 degree to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill.SKU: FBT CLA 406.2A -
Column Arrays, Live Gear
FBT CLA 604A Powered Column Array Speaker
2-way passive column line array.
6 x 100mm (4?) custom woofer with 25mm (1?) voice coil.
4 x 25mm (1?) dome neodymium tweeter on a waveguide.
Frequency response from 130Hz to 20kHz.
100V transformer with 2 levels of power, 100 and 200W.
100?H x 20?V dispersion.
4-pole Euroblock input connector: 8ohm ? 100W/100V ? 200W/100V.
Extruded-aluminum powder-coated cabinets.
Wall-mount installation bars are supplied.
Expandable line array by adding CLA604 modules in order to increase SPL and reduce the vertical radiation lobe width.
Ideal for fixed installation in reverberant environments, it can improve both music and voice intelligibility by improving direct/ reflected sound quality.
Standard white finish RAL 9016.
EN 54-24 EC Certificate of Conformity.SKU: FBT CLA 604 A -
Full-Range & Mid-Range, Live Gear
FBT J12A Powered Speaker
320mm (12??) custom woofer with improved efficiency and linearity
25mm (1?) HF custom compression driver
90?H x 60?V constant directivity horn
2-way bi-amplified system in Bass-Reflex
350Wrms class D amplifier for LF and 100Wrms for HFSKU: FBT J 12A -
Full-Range & Mid-Range, Live Gear
FBT J15A Powered Speaker
2-way processed active system
Polypropylene enclosure
1 x 15″ custom woofer
1 x 1″ neodymium silk dome tweeter
300W/70W built-in amplifier cont. RMS LF/HF
350W/100W built-in amplifier max. RMS LF/HF
700W/200W built-in amplifier max. peak LF/HF
2 x M10 suspension points
4 DSPpresets
Completely manufactured in ItalySKU: FBT J15A -
Full-Range & Mid-Range, Live Gear
FBT J8A Powered Speaker
2-way bi-amplified system in Bass-Reflex2-way bi-amplified system in Bass-Reflex
Polypropylene enclosure with integrated handle except J 5A/5
2 x M10 anchoring points (15A, 12A, DJ 15A), 2 x M6 suspension points (8A, 5A)
25mm (1?) HF custom AF compression driver (15A, 12A, 8A, DJ 15A)
90?H x 60?V constant directivity horn (15A, 12A, 8A, DJ 15A)SKU: FBT J8AW -
Live Gear, Sub-Woofer Speakers
FBT Muse 118FSA
Compact Hybrid band pass cardioid-arrayable subwoofer.
Hybrid configuration permit to obtain extension and speed of vented with high SPL and acoustic filtering of band pass
Suspension hardware fully compatible with MUSE210La allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations.
Subwoofer can be suspended facing forward or rearward and user-configurable with capability of front or rear mounting the grille and amp module for aesthetic uniformity in cardioid configuration
Very large area laminar-flow port to ensure no power compression and very low port turbulence
For cardioid configurations with one SUB rear-firing and two sub front-firing, more than 15db SPL rejection can be obtained behind the array
18″ (460mm) custom B&C neodymium magnet high excursion woofer with 3″(75mm) voice coil
Frequency Response from 33Hz to 100Hz
Class D amplifier delivering 1200WRMS
135dB / 139dB SPL
Switch mode power supplySKU: FBT MUSE 118FSA -
Full-Range & Mid-Range, Live Gear, Speakers, Studio Gear
FBT Promaxx 114A Powered Speaker
2-way, bi-amplified, bass reflex design cabinet
Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch mode power supplies
Digital signal processor with graphic display
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2 x M10 suspension points, 35 mm (1,3/8?) top-hat speaker stand socket, wall bracket mount flange plate
90?H x 60?V constant directivity horn
Front of House or Stage Floor Monitor: with 12?, 40? and 55? monitoring angles
3550mm (14″) LF woofer with 64mm (2.5″) voice coil, custom made for FBT
35mm (1.4″) throat exit B&C HF magnet compression driver with 34mm (1.4?) voice coil
Frequency response from 45Hz to 20KHz
Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
Extremely light only 17.4kg
Compact Dimensions: ProMaxX 114A uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112A, but features our 14? LF Woofer for lower frequency SPLSKU: PROMAXX114A -
Live Gear, Stage monitors
FBT STAGEMAXX 12MA
- StageMaxX 12Ma features a 12” B&C loudspeaker custom made for FBT and coaxially mounted with a B&C 1” exit throat compression driver.
- The coaxial configuration allows perfect alignment of the acoustic centers of the transducers, guaranteeing symmetry of dispersion and improving the focus of the stereo image in Left-Right configuration.
- Bi-amplification design with high dynamic Class D amplifiers delivering 400W + 100W RMS through a switch-mode power supply.
- Digital Signal Processor with 4 factory equalization presets provides simple and efficient EQ adjustment to optimize the acoustical response for different applications.
- The FOH preset allows the use of suspended installation as well as ‘drum fill’ applications.
- StageMaxX features two lateral M10 rigging points and a wall mounting bracket for different applications (optional accessories).
- 3 frontal status LED indicators to control the ON-OFF limiter and protection state.
- Three ergonomic integrated carrying handles, one frontally placed to easily drag and move the monitor on stage and the replaceable Teflon feet ensure sliding on stage with minimal wear.
- The cabinet has 35° or 55° tilted front panel for an optimal listening distance for a single user (35°) or for more users (55°).?
The 4 presets are:- ORIGINAL: is the typical “MaxX” sound adapted to the “STAGE” application
- HI-CUT / DRUM FILL: provides less mid-high for comfortable listening in near-field at a high level
- LO-CUT / DOUBLE: provides less low frequency for better intelligibility and for optimal coupling in a stereo configuration
- FOH: Front Of House use in suspended or pole-mount installations
400W + 100W RMS – 130dB SPL- 2-way, bi-amplified, bass reflex design cabinet
- Coaxial custom FBT 12” B&C speakers with 64mm (2.5”) voice coil
- B&C 25mm (1”) exit throat compression driver and 44mm (1.7”) voice coil
- Bi-amp: high dynamic Class D amplifiers 400W+100W RMS to provide a pleasant sound even at loud volume
- High-efficiency switch mode power supply
- Digital Signal Processor with 4 factory equalization presets
- Control Panel: XLR/Jack input and XLR link out, Volume, 4 Presets, HP Filter, 3 frontal status LED indicators
- 90° directivity horn
- Proprietary filtered algorithms, dynamic equalization at low frequencies, advanced energy control allows an high SPL while granting reliable and distortion-free audio reproduction with high headroom
- Sturdy gas-injected polypropylene molded enclosures to avoid undesired resonance
- Weather-resistant coating under the grill to protect the driver and the speaker
- High SPL in a compact size monitor
- 35° or 55° tilted front panel for an optimal listening distance for single or multiple users
- Three ergonomic integrated carrying handles, two M10 rigging points
- Teflon replaceable feet allow easy use on stage
SKU: FBT STAGEMAXX 12MA -
Column Arrays, Live Gear
FBT Vertus CS1000 Powered Speaker
- 2-way speaker system
- Subwoofer with a custom 12? (320mm) long excursion speaker with a 2.5? (64mm) voice coil
- 6 x full-range,? 3? (70mm) neodymium high-efficiency custom woofers with 0.75? (20mm) voice coils
- The frequency response of 40Hz to 20KHz
- Onboard Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively
- Built-in DSP with eight presets to suit every application
- Variable volume between -4.5 / + 5 dB in 8 steps
- Control Panel with master volume, presets, satellite volume, HPF, and LED status
- Input and link via XLR and Neutrik SPEAKON for satellite connection
- Dispersion 110 ? (H) x 30 ? (V)
- Modular design allowing two systems to be configured as one single solution via optional accessories
- Bass reflex stackable subwoofer in a birch plywood enclosure with diecast aluminum handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming
- The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation
- The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted.
- Ideal for both live applications and fixed installations
- Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side)
SKU: FBT CS 1000 -
-
Combos, Guitar Amplifier, Live Gear
Fender Mustang V Head V.2 Guitar Amp
One 1/4″ input
One channel with 100 presets
Gain, Volume, Treble, Middle, Bass, Reverb, Master, Stomp Edit, Modulation Edit, Delay Edit, Reverb Edit, Utility, Save, Exit and Tap/Tuner controls
Two XLR stereo outputs
Black textured vinyl covering with silver grille cloth
18 high-quality amp models including five new ones
New effects, including big fuzz, green screamer and intelligent pitch shifting
100 onboard factory and user presets
Blackface treatment and top-load front control panel
USB connectivity
Fender FUSE
Ableton Live Lite 8 Fender edition
AmpliTube Fender LE editionSKU: n/a -
Audio Accessories
Fender Performance Series Instrument Cable, Black Two-Pack
Hand-soldered, rugged metal connectors for perfomance reliability
Extra-thick 8-mm-diameter black PVC jacket to reduce handling noise
Flexible construction to alleviate kinking
90% copper coverage shield for less noise interference
Available in 6″ (patch cable) to 25′ lengthsSKU: 099-0820-043 -
Audio Interfaces, Live Gear
Fender Rumble 500 Head (V3) 230V Eu Metallic Black
Power: 500W (4 ohms)/350W (8 ohms)
Single channel
Controls: Gain, Bright on/off, Contour on/off, Vintage on/off, Drive, Overdrive on/off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Speaker out: two 1/4″ parallel
XLR line out
Aux. input
Headphone output
FX loop
Dimensions: 2.68″ x 13.75″ x 7.19″
Weight: 5 lb.
Footswitch optionalSKU: 2370606900 -
-
-
Audio Accessories, DI BOXES
Radial Engineering Pro48, Active Direct Box
- High resolution active direct box.
- 48V phantom powered with digital switching.
- Excellent headroom and dynamic range with a low noise floor.
- Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops.
- Pad switch engages a -15dB pad to reduce the input level.
- Connectors are 100% electrically isolated from the chassis.
SKU: n/a -
-
-
-
Cables
Roland RMC-B50 Black Series Balanced Microphone Cable, 50Ft /15M
Heavy-duty, studio grade connectors
Ultra-flexible cable jacket for less tangling and less hassle
Low-capacitance design ensures full frequency reproduction and maximum dynamic response
Lifetime guarantee
Official Roland productSKU: RMC-B50
