-
Sub-Woofer Speakers
FBT MITUS 218SA Powered Sub-Woofer
0 out of 5(0)- Large vented bass-reflex subwoofer
- 2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil
- Frequency Response from 30Hz to 100Hz
- Class D amplifiers delivering 2000Wrms with switch mode power supply
- DSP with 6 EQ presets, cardioids and infra configurations, delay
- 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint
- Six FBT design aluminum handles
- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base.
- M20 top mount stand socket
- Optional 4 swivel mount casters 100 mm (4’’) on request
- Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift
SKU: n/a -
Line Arrays
FBT MODUS 4805LA Powered Speaker System
0 out of 5(0)- 5° vertical dispersion
- 2 way powered bi-amplified true line array, bass-reflex design
- 4 x 200 mm (8″) custom neodymium woofers with 50mm voice coil (2″)
- 4 x 25 mm (1″) neodymium compression drivers and 44mm voice coil (1.7″)
- 58Hz – 20Khz frequency response
- Class D 600 Wrms amplifier for LF
- Class D 300 Wrms amplifier for HF
- High efficiency switching power supply
- DSP on board with 8 EQ presets, +/- 5db HF level
- Control for accurate amplitude shading control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
- 90° horizontal waveguide with near-flat wavefront up to 18Khz
- 18 mm (3/4″) birch plywood enclosure, with handles and mechanical hardware for suspension
- Mechanical hardware for suspension with 10:1 safety factor
SKU: n/a -
Sub-Woofer Speakers
FBT Mitus 118SA Powered Sub-Woofer System
0 out of 5(0)- Compact vented bandpass subwoofer design enclosure
- 460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil
- Frequency response from 36Hz to 100Hz
- Class D amplifier delivering 1200WRMS
- Switch-mode power supply
- DSP with 8 presets, cardioids and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
- 18 mm (3/4’’) birch plywood enclosure, scratch-resistant black paint
- Eight M10 fly points, M20 top mount stand socket, and two FBT design aluminum handles
- Optional 4 swivel-mount casters 80 mm (3.15’’) on request
- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base
SKU: n/a -
Wireless Microphones
Shure SLXD24D/B58 Dual Wireless System with 2 SLXD2/B58 Handheld Transmitters
0 out of 5(0)Featuring two Beta® 58 Supercardioid Dynamic Microphone capsules on SLXD2 handheld wireless transmitters, the SLXD24D/B58 provides transparent digital audio and rock-solid RF stability for lecture halls and live performances.
SKU: SLXD24DE/B58-G59₦695,000.00 -
Sub-Woofer Speakers
FBT X-SUB 18SA Powered Sub-Woofer
0 out of 5(0)- Compact band-pass design subwoofer with high SPL and punch
- 460mm (18”) high excursion woofer with 75 mm (3”) voice coil
- Frequency response from 38Hz to 120Hz
- 1200W Class D power amplifier with switch mode supply
- Digital Signal Processor with 6 presets, 2 equalizations with 2 LPF crossover settings
- Control panel with stereo combo XLR/Jack in/outs, Stereo XLR HP-Filter outs, Volume, EQ presets, phase reversal switch 0°-180°, status LED indicators
- 18mm plywood cabinet with scratch & scuff resistant paint finish
- M20 (20mm) top mount speaker stand socket, two FBT design aluminum handles, 100mm optional wheels
- Provides additional low-frequency reinforcement when used along with X-PRO or X-LITE speaker series
SKU: n/a -
Wireless Microphones
Shure SLXD4D Dual Channel Receiver
0 out of 5(0)The SLXD4D Dual Receiver is a convenient, streamlining choice for confident speech presentation and vocal performance from lecture halls to live entertainment.
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction
SKU: SLXD4DE=-G59₦369,700.00 -
Full-Range & Mid-Range
FBT X-PRO 15A Powered Speaker
0 out of 5(0)- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector
- Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
- Handles , M10 rigging points for suspended installation, 35mm stand socket and 35° or 45° monitor taper, all included to make the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application
SKU: 38771 -
Acoustic guitars
Fender Paramount PM-3 Acoustic Guitar – All-Mahogany – Triple-0 Body Style – Ovangkol Fingerboard – With Case
Acoustic guitarsFender Paramount PM-3 Acoustic Guitar – All-Mahogany – Triple-0 Body Style – Ovangkol Fingerboard – With Case
0 out of 5(0)- Triple-0 body style
- Solid mahogany top, back, and sides
- Ovangkol bridge and fingerboard
- Checkerboard purfling and rosette inspired by classic ‘60s Fender acoustic guitar designs
- Hand orientation: Right
SKU: 097-0331-322 -
Guitar Amplifier
Fender Rumble 200 v3 Bass Combo Amplifier
0 out of 5(0)- Explore bass tones from classic gritty growl to the slap-worthy modern punch with the newly-developed overdrive circuit and switchable contour controls
- A beefy 200-watt class D power amp and ported speaker enclosure, pump volume and deep bass response but keeps this amp very light in weight – only 34.5 pounds!
- Practice privately with the 1/8″ headphone output jack that also mutes the speaker output.
- Jam along with your favorite tracks by simply plugging your MP3 player into the 1/8″ Auxiliary input jack and instantly become part of the band.
- Enjoy the peace of mind that this amp is backed by Fender’s 5 Year Transferable Warranty.
SKU: 237-0506-900 -
Electric Guitars
Gretsch G5220 Electromatic Jet BT Single-Cut in Dark Cherry Metallic
0 out of 5(0)- Electromatic series
- Top: Maple
- Chambered body: Mahogany
- Neck: Mahogany
- Fretboard: Walnut
- Pearloid block fretboard inlays
- 22 Medium jumbo frets
- Nut width: 43 mm
- Scale: 625 mm
- Pickups: 2 Black Top Broad’Trons
- 2 Volume, 1 master volume, and 1 master tone controls
- Anchored Adjusto-Matic bridge
- Gretsch V-stop tailpiece
- G Arrow Knobs
- White pearl pickguard
- Die-cast machine heads
- Colour: Deep Cherry Metallic
SKU: 251-7110-539 -
Full-Range & Mid-Range
FBT X-PRO 12A Powered Speaker
0 out of 5(0)- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization alter the dynamics of the low-frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out, 6.3mm jack stereo input with volume, stereo RCA input with volume, XLR output selector coupled with stereo / mono, HP filter on / off, mic/line, DSP preset selector
- Integrated mixer with two stereo channels, one channel mic/line input, and an output coupled XLR mono/stereo to revive the other channel of the stereo signal to another speaker.
- Handles, M10 rigging points for suspended installation, 35mm stand socket, and 35° or 45° monitor taper, all included making the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
SKU: 38770 -
Audio Interfaces
Shure ANIUSB-MATRIX USB Audio Network Interface with Matrix Mixing
0 out of 5(0)Connects 4 Dante audio inputs and 1 analog input to an A / V conferencing system or a PC-based videoconferencing application
Flexible signal routing and connectivity: analog audio (1 block in / 1 block out) to room A / V conferencing system; USB (1 in / out) to connect to laptop or room PC
Power-over-Ethernet (PoE) eliminates the need for an outboard power supply
The compact form factor is easy to mount without an equipment rackSKU: ANIUSB-MATRIX₦272,700.00 -
Full-Range & Mid-Range
FBT X-PRO 10A Powered Speaker
0 out of 5(0)- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector
- Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
- Handles , M10 rigging points for suspended installation, 35mm stand socket and 35° or 45° monitor taper, all included to make the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
SKU: 38769 -
Wireless Microphones
Shure ULXD1 Digital Bodypack Transmitter
0 out of 5(0)- AES 256-bit encryption for applications for which secure transmission is needed
- Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source, eliminating the need for transmitter gain adjustments
- Optional Shure SB900A lithium-ion rechargeable battery provides over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect
- External charging contacts for docked charging (with the SBC200 and SBC220 Dual Docking Charger)
- Backlit LCD with easy to navigate menu and controls
- Rugged metal construction
- Detachable ¼ wave antenna
- Frequency and power lockout
SKU: ULXD1=-G51₦228,400.00
-
Live Gear, Mixers
Waves Emotion LV1 + Extreme Server-C +40 Preamp Stagebox +Axis One
0 out of 5(0)Everything you need to set up a SoundGrid-powered live show
eMotion LV1 64-channel (mono/stereo) mixer with Waves eMo plugins
SoundStudio STG-2412 + STG-1608 stageboxes (combined 40-in/20-out)
SoundGrid Extreme Server-C
Axis One Waves-optimized computer
8-port network switch and CAT6 Ethernet cableSKU: LV1 +₦3,909,400.00 -
Wireless Microphones
Shure AD4Q Four-Channel Digital Wireless Receiver
0 out of 5(0)Wide tuning range up to 184 MHz
True digital diversity reception per channel for drop-out resistance
Networked control with Wireless Workbench? software and ShurePlus? Channels iOS app
Quadversity mode for extended antenna coverage and improved RF signal-to-noise
Front panel headphone jack enables Dante? Cue and Dante? Browse monitoring
Configurable Ethernet switch for redundant Dante or AES67 digital output
Switchable XLR and AES3 outputs
Channel Quality meter displays RF signal-to-noise
Locking AC connectors
DC module version available to support redundant powerSKU: AD4Q -
Keyboards
Nord Stage 3 Keyboard – 88-Key Hammer Action Keybed with Nord Soft Case Stage/ Piano 88, Wood Keyboard Pedal Stand V2, Nord Triple Pedal
-
Sub-Woofer Speakers
FBT MITUS 218SA Powered Sub-Woofer
0 out of 5(0)- Large vented bass-reflex subwoofer
- 2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil
- Frequency Response from 30Hz to 100Hz
- Class D amplifiers delivering 2000Wrms with switch mode power supply
- DSP with 6 EQ presets, cardioids and infra configurations, delay
- 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint
- Six FBT design aluminum handles
- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base.
- M20 top mount stand socket
- Optional 4 swivel mount casters 100 mm (4’’) on request
- Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift
SKU: n/a -
Keyboards
Nord Grand – 88 -note Kawai Hammer Action with advanced triple sensors with Nord Soft Case Grand, Nord Triple Pedal, Nord Keyboard Stand
KeyboardsNord Grand – 88 -note Kawai Hammer Action with advanced triple sensors with Nord Soft Case Grand, Nord Triple Pedal, Nord Keyboard Stand
0 out of 5(0)General
- 88-note Kawai Hammer Action with advanced triple sensors
- Ivory touch keys
- Seamless Transitions when changing programs
- Layer and Split with Split Point crossfades
- OLED display for excellent overview
- Support for Nord Piano Monitor
Piano Section
- 2 GB memory for Nord Piano Library
- 120 Voice Polyphony
- Dedicated Piano Filters for Acoustic and Electric Pianos
- 3 Dynamic Curves
- Dynamic Pedal Noise with Nord Triple Pedal (included)
- Advanced String Resonance
- Soft Release
Sample Synth
- 512 MB Memory for Nord Sample Library 3.0
- Dedicated Sample Synth section with Attack, Decay/Release and dynamic controls
Effects
- High quality stereo effects modelled after classic stomp boxes
- Reverb with three modes – Room, Stage and Hall
SKU: 10846 -
Keyboards
Nord Stage 3 Keyboard – 73-Key Semi-Weighted Keybed with Nord Case Electro 73/Comp, Nord Triple Pedal, Nord Keyboard Stand
KeyboardsNord Stage 3 Keyboard – 73-Key Semi-Weighted Keybed with Nord Case Electro 73/Comp, Nord Triple Pedal, Nord Keyboard Stand
0 out of 5(0)SKU: n/a₦2,061,250.00 -
Keyboards
Nord Piano 4 88 Stage Piano with Nord Soft Case, Nord Keyboard Stand, Nord Triple Pedal
0 out of 5(0)- 88-note Triple Sensor key bed with grand weighted action for authentic Piano touch and feel; Nord Virtual Hammer Action Technology enables you to produce a new note without lifting the key completely for smoother repetitions
- Seamless transitions when changing sounds or programs while playing; Layer and Split with Split Point crossfades
- OLED display excellent overview
- Enhanced Organize Mode includes Copy/Paste and Move functionality for quickly arranging your Programs to your desired order; Page View lets you easily sort pages as a song list
- Numeric Pad for direct Program access
SKU: 10886₦1,867,250.00 -
Line Arrays
FBT MODUS 4805LA Powered Speaker System
0 out of 5(0)- 5° vertical dispersion
- 2 way powered bi-amplified true line array, bass-reflex design
- 4 x 200 mm (8″) custom neodymium woofers with 50mm voice coil (2″)
- 4 x 25 mm (1″) neodymium compression drivers and 44mm voice coil (1.7″)
- 58Hz – 20Khz frequency response
- Class D 600 Wrms amplifier for LF
- Class D 300 Wrms amplifier for HF
- High efficiency switching power supply
- DSP on board with 8 EQ presets, +/- 5db HF level
- Control for accurate amplitude shading control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
- 90° horizontal waveguide with near-flat wavefront up to 18Khz
- 18 mm (3/4″) birch plywood enclosure, with handles and mechanical hardware for suspension
- Mechanical hardware for suspension with 10:1 safety factor
SKU: n/a -
Mixers
Midas M32 LIVE Digital Console
0 out of 5(0)- Live performance and studio recording digital console with up to 40 simultaneous input channels
- 32 award-winning Midas PRO microphone preamplifiers
- 25 time-aligned and phase-coherent mix buses
- 32 bi-directional channels of live recording/playback on dual SD/SDHC (cards not included)
- Up to 3 hours of 32 channel PCM recording in one session – stored as uncompressed WAV files
SKU: n/a -
Wired Microphones
Shure PA821B Antenna Combiner for PSM Wireless Systems
0 out of 5(0)Combines up to eight PSM transmitters to a single antenna set for improved RF networking & reduced rack clutter
Wideband operation (470-865 MHz)
Quieter fan for significant reductions in ambient unit noise – especially useful for installation work
Temperature-sensitive fan power for significant reductions in ambient unit heat
8 Input LED Signals (green when active; off when inactive)
LED indications of signal presence, signal overloadSKU: PA821B -
Microphone Accessories, Wireless Microphones
Shure AD4D Two-Channel Digital Wireless Receiver
0 out of 5(0)- Works with Axient® Digital Wireless Systems
- Features networked control and signal routing options, plus mobile monitoring and control capabilities
- Available with or without accessories
- Wide tuning range up to 184 MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® software and ShurePlus™ Channels iOS app
- The front panel headphone jack enables Dante™ Cue and Dante™ Browse monitoring
- Configurable Ethernet switch for redundant Dante or AES67 digital output
- AES3 output
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- DC module version available to support redundant power
SKU: AD4DE=-A₦1,368,000.00 -
Line Arrays, Live Gear
FBT Muse 210LA Powered Array Speaker
0 out of 5(0)2-way, compact bass-reflex line array system
Two 250mm (10″) woofers with 64mm (2.5″) voice coils
Two custom B&C HF compression drivers with 25mm (1″) throats
Precision waveguide delivering 90? of horizontal dispersion up to 18Khz
Frequency response from 55Hz to 20KHz
Onboard Class-D bi-amp system delivering 600Wrms and 300Wrms for LF and HF with switch-mode power supplies
Onboard DSP processor with 8 EQ presets, adjustable HF level of +/- 5db for accurate amplitude shading
Control panel with XLR input and link, preset control, HF level control, HP-filter and ground lift
Strong birch plywood cabinet with integrated aluminum handles, hardware and fly-ware offering adjustable angling ranging from 0? to 10? in 1? increments
Wide range of accessories to offer ultimate flexibility no matter whether your MUSE line array system is suspended or ground-stacked, plus a specially designed cover to guard against bad weatherSKU: FBT MUSE 210 LA₦1,225,700.00 -
Live Gear
American Dj Vizi CMY 16RX – Hybrid Spot
0 out of 5(0)It uses a specially designed 300W LED engine that offers massive output for most large venues and event productions. It is a great hybrid utility fixture as it acts as a beam, spot and wash all-in-one with a massive zoom range from 8 to 46-degrees. This allows for designers to get maximum effects from one fixture without having to crowd truss in an installation with multiple fixtures. It also allows for less fixtures to be packed in a truck for production events. What’s more, is it comes in a smaller footprint than most other movers in its class. Plus, the Vizi CMY300 offers a CMY color mixing so designers can custom make colors to create a one-of-a-kind lightshow. The fixture has a built-in antenna with ADJ’s WiFLY EXR wireless DMX that transmits a signal up to 2500 feet / 700M (line of sight).
SKU: n/a
-
Wired Microphones
Shure SM58 Dynamic Vocal Microphone
0 out of 5(0)– frequency response (50?15,000hz) optimized for voice applications, with greater clarity at intermediate frequencies and low frequency attenuation
– Uniform cardioid polar diagram isolating the main sound source and minimizes background noise
– pneumatic anti-vibration support system that reduces noise from handling
– effective built-in spherical filter, antipop and windproof
– The package includes an adapter for support resistant to accidental breakage (180? swivel) and a bag for its containment/transportSKU: SM58-LCE -
Wired Microphones
Shure PGA58 Cardioid Dynamic Vocal Microphone
0 out of 5(0)Tailored microphone cartridge design for natural clarity in the frequency range of vocal performance
Cardioid polar pattern picks up audio from the source while rejecting unwanted noise
Updated industrial design with black metallic finish and grille for unobtrusive visual presence
On/Off switch for discrete control of microphone operation
Stand adapter for mounting to a microphone stand
Legendary Shure quality design and construction for exceptional performance in rigorous environmentsSKU: PGA58-XLR-E₦30,400.00 -
Wireless Microphones
Shure BLX288/PG58 Wireless Dual Vocal System with two PG58 Handheld Transmitters
Wireless MicrophonesShure BLX288/PG58 Wireless Dual Vocal System with two PG58 Handheld Transmitters
0 out of 5(0)Included: BLX88 dual wireless receiver; 2 BLX2/PG58 handheld transmitters with integrated PG58 cardioid dynamic microphone capsules; 2 microphone clip
Power and battery status LED
Adjustable gain control
Quick & easy frequency matching
2 AA batteries (included) provide up to 14 hours of continuous use
300 feet (91 m) operating range (line of sight)
Please refer user guide below for better usSKU: BLX288E/PG58-K14 -
Wired Microphones
Shure SM7B Vocal Microphone
0 out of 5(0)Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech
Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting
Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors
Internal “air suspension” shock isolation virtually eliminates mechanical noise transmission
Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration
Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals
Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone positionSKU: SM7B₦189,600.00 -
Wireless Microphones
Shure BLX24/PG58 Wireless Vocal System with PG58
0 out of 5(0)Included: BLX4 wireless receiver; BLX2/PG58 handheld transmitter with integrated PG58 cardioid dynamic microphone capsule; microphone clip
Power and battery status LED
Adjustable gain control
Quick & easy frequency matching
2 AA batteries (included) provide up to 14 hours of continuous use
300 feet (91 m) operating range (line of sight)SKU: BLX24E/PG58-K3E -
Wired Microphones
Shure SV200 Vocal Microphone
0 out of 5(0)Cardioid pickup pattern helps to reduce feedback
Features wide frequency response and high output for excellent sound quality
This versatile microphone can be used for a variety of performances including lead and backup vocals, karaoke and high quality presentations
Includes dent resistant grille and xlr-xlr cableSKU: SV200₦16,150.00 -
Guitar Accessories
Fender Extreme String Winder
0 out of 5(0)Restring and return your guitar in no time, thanks to the efficient Fender String Winder. Along with the capability of stringing your electric guitar with ease, this string winder is also specially notched to accommodate acoustic guitar tuning machines.
SKU: n/a -
Wireless Microphones
Shure BLX24R/B58 Wireless Vocal Rack-mount System with Beta 58A
0 out of 5(0)Shure BLX Wireless Systems combine professional quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision built and available in a variety of configurations, it’s the most accessible way to own the stage. Rack mountable and featuring rugged metal construction, the BLX4R offers simple setup and intuitive controls. One touch QuickScan frequency selection quickly locates the best open frequency in case of interference. Removable antennas allow for quick antenna distribution. Legendary sound and performance, right out of the box.Beta 58A Handheld Wireless System Includes: BLX4R 1/2 Rack, Single Channel Wireless Receiver, Single and Dual Rack Mount Kit, BLX2/Beta58A Handheld Transmitter with Beta58A Microphone, Microphone Clip, 1/4 Wave Antennas, Zippered Transmitter Accessory Bag, PS23US Power Supply and AA Batteries.
SKU: BLX24RE/B58-H8E
-
Wireless Microphones
Shure ULXD1 Digital Bodypack Transmitter
0 out of 5(0)- AES 256-bit encryption for applications for which secure transmission is needed
- Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source, eliminating the need for transmitter gain adjustments
- Optional Shure SB900A lithium-ion rechargeable battery provides over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect
- External charging contacts for docked charging (with the SBC200 and SBC220 Dual Docking Charger)
- Backlit LCD with easy to navigate menu and controls
- Rugged metal construction
- Detachable ¼ wave antenna
- Frequency and power lockout
SKU: ULXD1=-G51₦228,400.00 -
Wireless Microphones
Shure SLXD4D Dual Channel Receiver
0 out of 5(0)The SLXD4D Dual Receiver is a convenient, streamlining choice for confident speech presentation and vocal performance from lecture halls to live entertainment.
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction
SKU: SLXD4DE=-G59₦369,700.00 -
Wireless Microphones
Shure SLXD24D/B58 Dual Wireless System with 2 SLXD2/B58 Handheld Transmitters
0 out of 5(0)Featuring two Beta® 58 Supercardioid Dynamic Microphone capsules on SLXD2 handheld wireless transmitters, the SLXD24D/B58 provides transparent digital audio and rock-solid RF stability for lecture halls and live performances.
SKU: SLXD24DE/B58-G59₦695,000.00 -
Wireless Microphones
Shure SLXD2/B87A Handheld Transmitter With Beta®87A Capsule
0 out of 5(0)- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- Operating range of 100 m (300 ft.)
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries. Upgrade to the optional Shure SB903 Lithium-ion rechargeable battery to monitor battery charge status in hours and minutes, as well as battery life and health statistics.
- Rugged metal construction
SKU: SLXD2/B87A=-G59 -
Wireless Microphones
Shure SLXD1 Bodypack Transmitter
0 out of 5(0)- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- Operating range of 100 m (300 ft.)
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries. Upgrade to the optional Shure SB903 Lithium-ion rechargeable battery to monitor battery charge status in hours and minutes, as well as battery life and health statistics.
- Choice of instrument cable or lavalier, headworn and instrument microphones
- Ergonomic and durable plastic construction
SKU: SLXD1=-G59₦112,000.00 -
Wireless Microphones
Shure GLXD2/B87 Digital handheld transmitter with Beta 87A Capsule
0 out of 5(0)- Automatically links with GLX-D wireless receivers for seamless frequency changing and any necessary gain adjustment
- Integrated microphone capsule design
- Automatically links with GLX-D wireless receivers for seamless frequency-changing
- Sophisticated design with durable, lightweight construction
- Operating range of 20-30 m under typical conditions
- Lightweight and rugged construction
- Two-color transmitter status indicator LED
- The Digital Wireless Transmitter provides Shure Digital Power Management with multiple charging solutions such as car-, wall- or USB-chargers (GLXD4: In-receiver charger)
- Custom lithium-ion batteries provide up to 16 hours of continuous transmitter use.
- Connect for a 15-minute quick charge and count on up to 1.5 hours of performance.
RECHARGEABILITY OPTIONS:
- Charge battery alone:
- GLXD4 integrated charge port
- SB902 GLX-D Lithium-ion battery (available separately)
- Charge a spare battery while the system is in use:
- SBC902 USB battery dock charger (available separately)
- Charge battery in-transmitter:
- USB charge cable (included)
- SBC10-USB USB wall charger (available separately)
- SBC-CAR USB car charger (available separately)
SKU: GLXD2/B87A=-Z2₦172,250.00
-
Audio Accessories, DI BOXES
Radial Engineering Pro48, Active Direct Box
0 out of 5(0)- High resolution active direct box.
- 48V phantom powered with digital switching.
- Excellent headroom and dynamic range with a low noise floor.
- Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops.
- Pad switch engages a -15dB pad to reduce the input level.
- Connectors are 100% electrically isolated from the chassis.
SKU: n/a -
Audio Accessories, DI BOXES
Radial Engineering Pro DI Passive
0 out of 5(0)Raidal ProDI Passive Mono Direct Box at a Glance:
- Full-range passive direct box
- Custom isolation transformer eliminates noise
- Really easy to use
- Built like a tank
Passive vs. Active DI
The Radial ProDI and ProD2 (stereo version) are full-range passive direct boxes. Active direct boxes employ electronic circuits to change the impedance from hi-Z to lo-Z and balance the signal. Passive DIs instead employ a simple passive transformer to do the work. Active DIs require batteries, 48V phantom-power or external power supplies to power their circuits, while passive transformer-equipped direct boxes do not require any power to perform their task. The advantage of a transformer over typical active circuits can be summarized as “a great device to reduce system noise” in a sound system. To accomplish the task of noise elimination, the Radial ProDI and ProD2 features first-class transformers and require no batteries or power supply.Custom Isolation Transformer
The Radial ProDI is equipped with a custom-made audio transformer, which provides exceptional signal handling without saturation. More importantly, the ProDI’s custom transformer has extremely low phase distortion in the critical bass and mid regions. The ProDI’s transformer provides 100% isolation, to eliminate hum- and noise causing ground loops, while maintaining signal integrity. Inside the ProDI you’ll also find isolated XLR connectors, to eliminate chassis ground potential, as well as a military-spec PC board, with a full surface ground plane to reduce susceptibility to RF noise. The result is exceptional clarity and definition, at an attractive price point.Really Easy to Use
The best feature of the ProDI is “plug and play” ease of use. All you do is connect the instrument to the 1/4″ inputs, the 1/4″ through the jack to the stage amplifier(s) or mixer and the XLR output to the mixing console and you are done. Any distortion? Hit the -15dB pad. Any noise? Just depress the ground lift switch. You will find that with acoustic guitars and basses, the natural tone of the instrument will shine through with a smooth and musical rendering. For electrically powered devices, such as keyboards, the ProDI will immediately eliminate troublesome ground loops while delivering solid dynamics, with a full rich sound.Solid Construction
Look inside a ProDI and you’ll find the build quality and components to be of only the highest professional standards. Radial’s proven construction methods and materials ensure years of trouble-free service — able to withstand the rigors of the most demanding, high-use professional environments. Radial pioneered the use of its innovative “book cover” design, which provides a protective zone around the switches and connectors that keep the components safe. The 14-gauge welded I-beam inner chassis and 14-gauge outer shell found in the ProD2 and ProDI greatly reduce the possibility of torque stresses being applied to the PC board. Stress on circuit boards causes broken and intermittent solder joints, a common cause of failure in commercial rental and other high-use environments. A full bottom no-slip rubber pad works double-duty by providing protection from electrical shock and making sure these DI’s stay put.Radial ProDI Passive Mono Direct Box Features:
- Full-range, passive direct box
- Isolation transformer eliminates noise
- Very low harmonic and phase distortion
- Compact and rugged design
- Ideal for live sound and studio.
- Isolated XLR connector eliminates chassis ground potential
- Custom audio transformer on input provides 100% isolation to eliminate hum- and noise-causing ground loops, while maintaining signal integrity.
- Military-spec PC board, with full surface ground plane to reduce susceptibility to RF noise
- High-grade switches — long life, high cycle for reliable performance
- 14-gauge steel welded I-beam construction makes it virtually impossible to torque the PC board
- -15dB pad reduces the level going in from loud sources that could overload the circuit and cause distortion
- Book-end design creates a protective zone around the switches & connectors, indestructible 14-gauge steel construction
- Full no-slip rubber bottom pad provides mechanical isolation, electrical insulation and prevents the unit from sliding around
- Balanced male XLR output connector, AES standard with pin-1 ground and pin-2 hot
- Lift switch lifts the ground to pin-1 on both channels.
- Heavy-duty baked enamel finish for excellent durability
SKU: n/a₦49,400.00
-
Cables
Roland RMC-B50 Black Series Balanced Microphone Cable, 50Ft /15M
0 out of 5(0)Heavy-duty, studio grade connectors
Ultra-flexible cable jacket for less tangling and less hassle
Low-capacitance design ensures full frequency reproduction and maximum dynamic response
Lifetime guarantee
Official Roland productSKU: RMC-B50₦27,900.00
-
Bass Guitar
Squier Vintage Modified Bass VI 3, Sunburst
0 out of 5(0)- Distinctive looks and tone
- Three custom Jaguar single coil pickups deliver a versatile array of sounds
- Vintage style floating vibrato bridge
- Comfortable body shape, with an easy-to-play bolt-on Maple neck
- Bound Indian Laurel fingerboard, with Pearloid block inlays
- Suitable for intermediate to experienced players looking to add a little extra sonic flavour to their sound
SKU: n/a₦191,700.00 -
Bass Guitar
Squier Contemporary Active Jazz Bass V HH, Maple Fingerboard, Black
0 out of 5(0)- Dual Squier SQR ceramic humbucking pickups produce high fidelity tone great for any style
- Active 9-volt preamp with controls for Volume, Blend, Tone and Bass/Treble Boost
- Modern “C”-shaped neck profile with 12”-radius fingerboard
- Maple fingerboard with 20 frets
- Hand orientation: Right
SKU: 370460506₦285,900.00 -
Bass Guitar
Fender Vintage Modified Bass VI, Olympic White
0 out of 5(0)- Vintage tone delivered by three custom Jaguar single-coil pickups with notched “claw” shielding rings
- Authentically vintage-styling including the model’s classic 30″ scale and tuning
- A vast array of tonal possibilities via the (4) two-position slider switches
SKU: n/a₦191,700.00
-
Electric Guitars
Fender Jimi Hendrix Stratocaster, Maple Fingerboard – Olympic White
0 out of 5(0)The reverse headstock and reverse-slanted ?65 American Vintage bridge pickup, accurately reproduces Jimi?s legendary signature tone.
A maple fingerboard with 21 medium jumbo frets, a modern fingerboard radius, and comfortable ?C? shaped neck offers comfortable chording and effortless string-bending.
From dive-bombs to sweet shimmering bends, a 6-saddle Synchronized Vintage Tremolo bridge offers the same expressive pitch control Jimi used to create his signature sound.SKU: 014-5802-305-1
-
Keyboard accessories
Nord Soft, Wheeled Carrying Case for Nord Grand Keyboard and Accessories
0 out of 5(0)- Ultimate soft case, plush interior, and thick padding
- A large-sized outer pocket holds all cables and accessories
- High-quality wheels
- Top and mid-level carrying handle
- Distinctive Nord red color; Dimensions: 58″ x 20″ x 13″; 28 lbs.
SKU: 12026 -
Keyboard accessories
Nord Stage 88 Soft Case Gig Bag for the Stage EX 88 Piano
0 out of 5(0)- High quality custom fit carry case
- Textile exterior with padded interior for extra protection
- Reinforced cover protects synthesizer knobs
- Spare handle and wheels
- Extra pocket can hold keyboard legs and music stand
SKU: 10325₦169,750.00 -
Keyboard accessories
Nord 12001 Keyboard Stand Ex For Stage 76/88 And C1
0 out of 5(0)- The Nord Keyboard Stand EX height adjustable keyboard stand is for the Nord Stage 76EX, 88EX,
- the Nord C1 Combo Organ.
- The Nord Stand EX legs are mounted to the bottom plate of the instrument preventing it from moving around
- Keyboard Stand Ex For Stage 76 88
SKU: 12001₦97,000.00 -
Keyboard accessories
Nord Piano Monitor V2 Active Stereo Speakers
0 out of 5(0)- Exclusively engineered for optimal dynamic reproduction of the electric and acoustic pianos in the Nord Piano Library
- A new design allows the brackets to mount directly to the bottom of the speaker; brackets now included
- They feature an additional auxiliary audio input for connecting a laptop or smartphone; perfect for playing along, rehearsing or just listening to music
- Included: 2 x Nord piano monitor speakers; piano monitor brackets; stereo audio cables (2 x 1/4″), 0.5m and 1.5m; mono audio cable 1/4″ between left and right speaker, 1,2m; power cables, US and EU
- Mountable on Nord Piano 4, Nord Grand & Nord Stage 3 Rev b; Dimensions: 14″ x 11″ x 16″; 18 lbs.
- Included components: Power cables, US and EU; Rubber feet
SKU: 12024₦363,750.00 -
keyboard pedals
Nord Triple Pedal Triple-Velocity, Motion-Sensing Piano Pedal for Nord Piano 88/Nord Stage 2
keyboard pedalsNord Triple Pedal Triple-Velocity, Motion-Sensing Piano Pedal for Nord Piano 88/Nord Stage 2
0 out of 5(0)- Compatible with Nord Stage 2 HA76, HA88 and SW73, Nord Piano 88
- Sustain pedal with half-pedaling for release-and-catch techniques
- Soft pedal for added dynamic control
- Sostenuto for selective sustaining of notes
- Capable of triggering mechanical noises in select patches
SKU: 12010₦145,500.00
-
Sub-Woofer Speakers
FBT Mitus 118SA Powered Sub-Woofer System
0 out of 5(0)- Compact vented bandpass subwoofer design enclosure
- 460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil
- Frequency response from 36Hz to 100Hz
- Class D amplifier delivering 1200WRMS
- Switch-mode power supply
- DSP with 8 presets, cardioids and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
- 18 mm (3/4’’) birch plywood enclosure, scratch-resistant black paint
- Eight M10 fly points, M20 top mount stand socket, and two FBT design aluminum handles
- Optional 4 swivel-mount casters 80 mm (3.15’’) on request
- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base
SKU: n/a -
Sub-Woofer Speakers
FBT MITUS 218SA Powered Sub-Woofer
0 out of 5(0)- Large vented bass-reflex subwoofer
- 2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil
- Frequency Response from 30Hz to 100Hz
- Class D amplifiers delivering 2000Wrms with switch mode power supply
- DSP with 6 EQ presets, cardioids and infra configurations, delay
- 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint
- Six FBT design aluminum handles
- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base.
- M20 top mount stand socket
- Optional 4 swivel mount casters 100 mm (4’’) on request
- Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift
SKU: n/a -
Line Arrays
FBT MODUS 4805LA Powered Speaker System
0 out of 5(0)- 5° vertical dispersion
- 2 way powered bi-amplified true line array, bass-reflex design
- 4 x 200 mm (8″) custom neodymium woofers with 50mm voice coil (2″)
- 4 x 25 mm (1″) neodymium compression drivers and 44mm voice coil (1.7″)
- 58Hz – 20Khz frequency response
- Class D 600 Wrms amplifier for LF
- Class D 300 Wrms amplifier for HF
- High efficiency switching power supply
- DSP on board with 8 EQ presets, +/- 5db HF level
- Control for accurate amplitude shading control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
- 90° horizontal waveguide with near-flat wavefront up to 18Khz
- 18 mm (3/4″) birch plywood enclosure, with handles and mechanical hardware for suspension
- Mechanical hardware for suspension with 10:1 safety factor
SKU: n/a -
Sub-Woofer Speakers
FBT X-SUB 18SA Powered Sub-Woofer
0 out of 5(0)- Compact band-pass design subwoofer with high SPL and punch
- 460mm (18”) high excursion woofer with 75 mm (3”) voice coil
- Frequency response from 38Hz to 120Hz
- 1200W Class D power amplifier with switch mode supply
- Digital Signal Processor with 6 presets, 2 equalizations with 2 LPF crossover settings
- Control panel with stereo combo XLR/Jack in/outs, Stereo XLR HP-Filter outs, Volume, EQ presets, phase reversal switch 0°-180°, status LED indicators
- 18mm plywood cabinet with scratch & scuff resistant paint finish
- M20 (20mm) top mount speaker stand socket, two FBT design aluminum handles, 100mm optional wheels
- Provides additional low-frequency reinforcement when used along with X-PRO or X-LITE speaker series
SKU: n/a -
Full-Range & Mid-Range
FBT X-PRO 10A Powered Speaker
0 out of 5(0)- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector
- Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
- Handles , M10 rigging points for suspended installation, 35mm stand socket and 35° or 45° monitor taper, all included to make the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
SKU: 38769 -
Full-Range & Mid-Range
FBT X-PRO 12A Powered Speaker
0 out of 5(0)- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization alter the dynamics of the low-frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out, 6.3mm jack stereo input with volume, stereo RCA input with volume, XLR output selector coupled with stereo / mono, HP filter on / off, mic/line, DSP preset selector
- Integrated mixer with two stereo channels, one channel mic/line input, and an output coupled XLR mono/stereo to revive the other channel of the stereo signal to another speaker.
- Handles, M10 rigging points for suspended installation, 35mm stand socket, and 35° or 45° monitor taper, all included making the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
SKU: 38770 -
Full-Range & Mid-Range
FBT X-PRO 15A Powered Speaker
0 out of 5(0)- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector
- Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
- Handles , M10 rigging points for suspended installation, 35mm stand socket and 35° or 45° monitor taper, all included to make the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application
SKU: 38771 -
Full-Range & Mid-Range, Live Gear
Avante Audio A18S Speaker (B-Stock)
0 out of 5(0)- Amp Power: 1600W Peak; 500W RMS Class D amplifier
- Built-in Digital Signal Processing (DSP) with LCD screen, EQ & multiple presets
- Frequency Range: 35Hz-150Hz
- Nominal Coverage: Omni-direction, cardioid
- Output (Peak SPL @ 1M): 127dB
- Drivers: 18-inch woofer with 3-inch voice coil
- Inputs: 2x Balanced Female XLR ?-inch combo jack
- Outputs: 2x Balanced Male XLR
- Enclosures: 15mm Plywood
- Grill: 1.5mm Steel
- Handles: Two: 1 on each side
- Pole Mounting: Ground Stack (includes mounting pole)
- Power Input: 115V/60Hz or 240V/50Hz (country-specific)
- Power Consumption: 600W
- Dimensions: 26.1?x20.1?x25.5? / 662x510x647mm
- Weight: 73 lbs. / 33.1 kg
SKU: Avante Audio A18S (B-stock)₦374,300.00 -
Line Arrays
Avante Audio Imperio SUB210
0 out of 5(0)Speaker powered via 3-pin power Con input and output connectorsInternal selectable X-over 90 or 120 HzPhase Switchable (0 / 180°)LED power, signal, clip indicator124 dB max SPLFlyable with flybar (available separately)6th order bandpass design1.2mm steel grillPlywood cabinetVolume control dialSKU: IMPERIO SUB210₦498,700.00