FBT
Showing all 20 results
-
Column Arrays
FBT CLA 206A Powered Speaker
Bi-amplified 2-way line array
2 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switching mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and anti-slip upper and lower
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws. New hardware for flying installations, for ground setups and the possibility of coupling two or more CLA 406A / CLA 206A with an angle of 0 – 20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined 20 degree to have maximum flexibility of use in combination with other CLA 206A or CLA 406A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in small point source systems with the CLA 118SA sub and in clusters of two to have a dispersion of 40 degree (V). It can also be considered a down-fill for CLA 406A systems.SKU: n/a -
Live Gear, Sub-Woofer Speakers
FBT CLA 208SA Powered Line Array Sub Speaker
High-level sound quality from 50Hz to 20kHz expressly developed for live performance
Long distance sound projection and better SPL distribution towards the audience
Great and dynamic power performance thanks to tri-amplification system
Lightweight and easy to carry
Design and elegance for an easy integration even in the most demanding installations
Very compact dimensions enable the listener to concentrate on sound and not on speakers!
High horizontal dispersionSKU: FBT CLA 208 SA -
Column Arrays, Live Gear
FBT CLA 406.2A Powered Speaker
Bi-amplified 2-way line array
4 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 degree H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0 degree-20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined by 10 degree to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill.SKU: FBT CLA 406.2A -
Column Arrays, Live Gear
FBT CLA 604A Powered Column Array Speaker
2-way passive column line array.
6 x 100mm (4?) custom woofer with 25mm (1?) voice coil.
4 x 25mm (1?) dome neodymium tweeter on a waveguide.
Frequency response from 130Hz to 20kHz.
100V transformer with 2 levels of power, 100 and 200W.
100?H x 20?V dispersion.
4-pole Euroblock input connector: 8ohm ? 100W/100V ? 200W/100V.
Extruded-aluminum powder-coated cabinets.
Wall-mount installation bars are supplied.
Expandable line array by adding CLA604 modules in order to increase SPL and reduce the vertical radiation lobe width.
Ideal for fixed installation in reverberant environments, it can improve both music and voice intelligibility by improving direct/ reflected sound quality.
Standard white finish RAL 9016.
EN 54-24 EC Certificate of Conformity.SKU: FBT CLA 604 A -
Full-Range & Mid-Range, Live Gear
FBT J12A Powered Speaker
320mm (12??) custom woofer with improved efficiency and linearity
25mm (1?) HF custom compression driver
90?H x 60?V constant directivity horn
2-way bi-amplified system in Bass-Reflex
350Wrms class D amplifier for LF and 100Wrms for HFSKU: FBT J 12A -
Full-Range & Mid-Range, Live Gear
FBT J15A Powered Speaker
2-way processed active system
Polypropylene enclosure
1 x 15″ custom woofer
1 x 1″ neodymium silk dome tweeter
300W/70W built-in amplifier cont. RMS LF/HF
350W/100W built-in amplifier max. RMS LF/HF
700W/200W built-in amplifier max. peak LF/HF
2 x M10 suspension points
4 DSPpresets
Completely manufactured in ItalySKU: FBT J15A -
Full-Range & Mid-Range, Live Gear
FBT J8A Powered Speaker
2-way bi-amplified system in Bass-Reflex2-way bi-amplified system in Bass-Reflex
Polypropylene enclosure with integrated handle except J 5A/5
2 x M10 anchoring points (15A, 12A, DJ 15A), 2 x M6 suspension points (8A, 5A)
25mm (1?) HF custom AF compression driver (15A, 12A, 8A, DJ 15A)
90?H x 60?V constant directivity horn (15A, 12A, 8A, DJ 15A)SKU: FBT J8AW -
Sub-Woofer Speakers
FBT Mitus 118SA Powered Sub-Woofer System
- Compact vented bandpass subwoofer design enclosure
- 460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil
- Frequency response from 36Hz to 100Hz
- Class D amplifier delivering 1200WRMS
- Switch-mode power supply
- DSP with 8 presets, cardioids and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
- 18 mm (3/4’’) birch plywood enclosure, scratch-resistant black paint
- Eight M10 fly points, M20 top mount stand socket, and two FBT design aluminum handles
- Optional 4 swivel-mount casters 80 mm (3.15’’) on request
- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base
SKU: n/a -
Sub-Woofer Speakers
FBT MITUS 218SA Powered Sub-Woofer
- Large vented bass-reflex subwoofer
- 2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil
- Frequency Response from 30Hz to 100Hz
- Class D amplifiers delivering 2000Wrms with switch mode power supply
- DSP with 6 EQ presets, cardioids and infra configurations, delay
- 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint
- Six FBT design aluminum handles
- Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base.
- M20 top mount stand socket
- Optional 4 swivel mount casters 100 mm (4’’) on request
- Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift
SKU: n/a -
Line Arrays
FBT MODUS 4805LA Powered Speaker System
- 5° vertical dispersion
- 2 way powered bi-amplified true line array, bass-reflex design
- 4 x 200 mm (8″) custom neodymium woofers with 50mm voice coil (2″)
- 4 x 25 mm (1″) neodymium compression drivers and 44mm voice coil (1.7″)
- 58Hz – 20Khz frequency response
- Class D 600 Wrms amplifier for LF
- Class D 300 Wrms amplifier for HF
- High efficiency switching power supply
- DSP on board with 8 EQ presets, +/- 5db HF level
- Control for accurate amplitude shading control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
- 90° horizontal waveguide with near-flat wavefront up to 18Khz
- 18 mm (3/4″) birch plywood enclosure, with handles and mechanical hardware for suspension
- Mechanical hardware for suspension with 10:1 safety factor
SKU: n/a -
Live Gear, Sub-Woofer Speakers
FBT Muse 118FSA
Compact Hybrid band pass cardioid-arrayable subwoofer.
Hybrid configuration permit to obtain extension and speed of vented with high SPL and acoustic filtering of band pass
Suspension hardware fully compatible with MUSE210La allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations.
Subwoofer can be suspended facing forward or rearward and user-configurable with capability of front or rear mounting the grille and amp module for aesthetic uniformity in cardioid configuration
Very large area laminar-flow port to ensure no power compression and very low port turbulence
For cardioid configurations with one SUB rear-firing and two sub front-firing, more than 15db SPL rejection can be obtained behind the array
18″ (460mm) custom B&C neodymium magnet high excursion woofer with 3″(75mm) voice coil
Frequency Response from 33Hz to 100Hz
Class D amplifier delivering 1200WRMS
135dB / 139dB SPL
Switch mode power supplySKU: FBT MUSE 118FSA -
Line Arrays, Live Gear
FBT Muse 210LA Powered Array Speaker
2-way, compact bass-reflex line array system
Two 250mm (10″) woofers with 64mm (2.5″) voice coils
Two custom B&C HF compression drivers with 25mm (1″) throats
Precision waveguide delivering 90? of horizontal dispersion up to 18Khz
Frequency response from 55Hz to 20KHz
Onboard Class-D bi-amp system delivering 600Wrms and 300Wrms for LF and HF with switch-mode power supplies
Onboard DSP processor with 8 EQ presets, adjustable HF level of +/- 5db for accurate amplitude shading
Control panel with XLR input and link, preset control, HF level control, HP-filter and ground lift
Strong birch plywood cabinet with integrated aluminum handles, hardware and fly-ware offering adjustable angling ranging from 0? to 10? in 1? increments
Wide range of accessories to offer ultimate flexibility no matter whether your MUSE line array system is suspended or ground-stacked, plus a specially designed cover to guard against bad weatherSKU: FBT MUSE 210 LA -
Full-Range & Mid-Range, Live Gear, Speakers, Studio Gear
FBT Promaxx 114A Powered Speaker
2-way, bi-amplified, bass reflex design cabinet
Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch mode power supplies
Digital signal processor with graphic display
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2 x M10 suspension points, 35 mm (1,3/8?) top-hat speaker stand socket, wall bracket mount flange plate
90?H x 60?V constant directivity horn
Front of House or Stage Floor Monitor: with 12?, 40? and 55? monitoring angles
3550mm (14″) LF woofer with 64mm (2.5″) voice coil, custom made for FBT
35mm (1.4″) throat exit B&C HF magnet compression driver with 34mm (1.4?) voice coil
Frequency response from 45Hz to 20KHz
Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
Extremely light only 17.4kg
Compact Dimensions: ProMaxX 114A uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112A, but features our 14? LF Woofer for lower frequency SPLSKU: PROMAXX114A -
Live Gear, Stage monitors
FBT STAGEMAXX 12MA
- StageMaxX 12Ma features a 12” B&C loudspeaker custom made for FBT and coaxially mounted with a B&C 1” exit throat compression driver.
- The coaxial configuration allows perfect alignment of the acoustic centers of the transducers, guaranteeing symmetry of dispersion and improving the focus of the stereo image in Left-Right configuration.
- Bi-amplification design with high dynamic Class D amplifiers delivering 400W + 100W RMS through a switch-mode power supply.
- Digital Signal Processor with 4 factory equalization presets provides simple and efficient EQ adjustment to optimize the acoustical response for different applications.
- The FOH preset allows the use of suspended installation as well as ‘drum fill’ applications.
- StageMaxX features two lateral M10 rigging points and a wall mounting bracket for different applications (optional accessories).
- 3 frontal status LED indicators to control the ON-OFF limiter and protection state.
- Three ergonomic integrated carrying handles, one frontally placed to easily drag and move the monitor on stage and the replaceable Teflon feet ensure sliding on stage with minimal wear.
- The cabinet has 35° or 55° tilted front panel for an optimal listening distance for a single user (35°) or for more users (55°).?
The 4 presets are:- ORIGINAL: is the typical “MaxX” sound adapted to the “STAGE” application
- HI-CUT / DRUM FILL: provides less mid-high for comfortable listening in near-field at a high level
- LO-CUT / DOUBLE: provides less low frequency for better intelligibility and for optimal coupling in a stereo configuration
- FOH: Front Of House use in suspended or pole-mount installations
400W + 100W RMS – 130dB SPL- 2-way, bi-amplified, bass reflex design cabinet
- Coaxial custom FBT 12” B&C speakers with 64mm (2.5”) voice coil
- B&C 25mm (1”) exit throat compression driver and 44mm (1.7”) voice coil
- Bi-amp: high dynamic Class D amplifiers 400W+100W RMS to provide a pleasant sound even at loud volume
- High-efficiency switch mode power supply
- Digital Signal Processor with 4 factory equalization presets
- Control Panel: XLR/Jack input and XLR link out, Volume, 4 Presets, HP Filter, 3 frontal status LED indicators
- 90° directivity horn
- Proprietary filtered algorithms, dynamic equalization at low frequencies, advanced energy control allows an high SPL while granting reliable and distortion-free audio reproduction with high headroom
- Sturdy gas-injected polypropylene molded enclosures to avoid undesired resonance
- Weather-resistant coating under the grill to protect the driver and the speaker
- High SPL in a compact size monitor
- 35° or 55° tilted front panel for an optimal listening distance for single or multiple users
- Three ergonomic integrated carrying handles, two M10 rigging points
- Teflon replaceable feet allow easy use on stage
SKU: FBT STAGEMAXX 12MA -
Column Arrays, Live Gear
FBT Vertus CS1000 Powered Speaker
- 2-way speaker system
- Subwoofer with a custom 12? (320mm) long excursion speaker with a 2.5? (64mm) voice coil
- 6 x full-range,? 3? (70mm) neodymium high-efficiency custom woofers with 0.75? (20mm) voice coils
- The frequency response of 40Hz to 20KHz
- Onboard Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively
- Built-in DSP with eight presets to suit every application
- Variable volume between -4.5 / + 5 dB in 8 steps
- Control Panel with master volume, presets, satellite volume, HPF, and LED status
- Input and link via XLR and Neutrik SPEAKON for satellite connection
- Dispersion 110 ? (H) x 30 ? (V)
- Modular design allowing two systems to be configured as one single solution via optional accessories
- Bass reflex stackable subwoofer in a birch plywood enclosure with diecast aluminum handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming
- The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation
- The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted.
- Ideal for both live applications and fixed installations
- Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side)
SKU: FBT CS 1000 -
Full-Range & Mid-Range
FBT X-PRO 10A Powered Speaker
- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector
- Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
- Handles , M10 rigging points for suspended installation, 35mm stand socket and 35° or 45° monitor taper, all included to make the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
SKU: 38769 -
Full-Range & Mid-Range
FBT X-PRO 12A Powered Speaker
- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization alter the dynamics of the low-frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out, 6.3mm jack stereo input with volume, stereo RCA input with volume, XLR output selector coupled with stereo / mono, HP filter on / off, mic/line, DSP preset selector
- Integrated mixer with two stereo channels, one channel mic/line input, and an output coupled XLR mono/stereo to revive the other channel of the stereo signal to another speaker.
- Handles, M10 rigging points for suspended installation, 35mm stand socket, and 35° or 45° monitor taper, all included making the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
SKU: n/a -
Full-Range & Mid-Range
FBT X-PRO 15A Powered Speaker
- Plywood cabinet with anti-scratch coating and internal ply reinforcement
- Custom FBT Speakers with high linear excursion capability and efficiency
- Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
- 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.
- Universal switching mode power supply 100-240VAC
- DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
- Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance
- Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector
- Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
- Handles , M10 rigging points for suspended installation, 35mm stand socket and 35° or 45° monitor taper, all included to make the speaker adaptable to any application
- Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
- The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application
SKU: 38771 -
Sub-Woofer Speakers
FBT X-SUB 18SA Powered Sub-Woofer
- Compact band-pass design subwoofer with high SPL and punch
- 460mm (18”) high excursion woofer with 75 mm (3”) voice coil
- Frequency response from 38Hz to 120Hz
- 1200W Class D power amplifier with switch mode supply
- Digital Signal Processor with 6 presets, 2 equalizations with 2 LPF crossover settings
- Control panel with stereo combo XLR/Jack in/outs, Stereo XLR HP-Filter outs, Volume, EQ presets, phase reversal switch 0°-180°, status LED indicators
- 18mm plywood cabinet with scratch & scuff resistant paint finish
- M20 (20mm) top mount speaker stand socket, two FBT design aluminum handles, 100mm optional wheels
- Provides additional low-frequency reinforcement when used along with X-PRO or X-LITE speaker series
SKU: n/a
Since 1963, FBT designs and manufactures highly professional audio products, with the aim of improving sound quality, making it clean, harmonic and melodious, thus enabling music to strike listeners' hearts and souls.