Column Arrays
Showing all 5 results
-
Column Arrays, Live Gear, Sub-Woofer Speakers
Avante Achromic AS8 Speaker
The fully-featured and easy to setup Achromic AS8 system comprises an active 8-inch sub-woofer enclosure alongside two column units. One is loaded with six precision-aligned 2.75” speaker cones while the other serves as a spacer to lift the speaker column up to optimal height. Both feature Avante’s new SAM (Secure Array Mount) system which allows the columns to lock securely to the sub and to one another without risk of being toppled over. The SAM connection also passes the audio signal from the sub up to the columns, removing the need for speaker cables, and allows the main column to connect directly to the sub without using the spacer if required, ideal for performances from a high stage.
SKU: AVANTE AS8 -
Column Arrays
FBT CLA 206A Powered Speaker
Bi-amplified 2-way line array
2 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switching mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and anti-slip upper and lower
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws. New hardware for flying installations, for ground setups and the possibility of coupling two or more CLA 406A / CLA 206A with an angle of 0 – 20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined 20 degree to have maximum flexibility of use in combination with other CLA 206A or CLA 406A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in small point source systems with the CLA 118SA sub and in clusters of two to have a dispersion of 40 degree (V). It can also be considered a down-fill for CLA 406A systems.SKU: n/a -
Column Arrays, Live Gear
FBT CLA 406.2A Powered Speaker
Bi-amplified 2-way line array
4 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 degree H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0 degree-20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined by 10 degree to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill.SKU: FBT CLA 406.2A -
Column Arrays, Live Gear
FBT CLA 604A Powered Column Array Speaker
2-way passive column line array.
6 x 100mm (4?) custom woofer with 25mm (1?) voice coil.
4 x 25mm (1?) dome neodymium tweeter on a waveguide.
Frequency response from 130Hz to 20kHz.
100V transformer with 2 levels of power, 100 and 200W.
100?H x 20?V dispersion.
4-pole Euroblock input connector: 8ohm ? 100W/100V ? 200W/100V.
Extruded-aluminum powder-coated cabinets.
Wall-mount installation bars are supplied.
Expandable line array by adding CLA604 modules in order to increase SPL and reduce the vertical radiation lobe width.
Ideal for fixed installation in reverberant environments, it can improve both music and voice intelligibility by improving direct/ reflected sound quality.
Standard white finish RAL 9016.
EN 54-24 EC Certificate of Conformity.SKU: FBT CLA 604 A -
Column Arrays, Live Gear
FBT Vertus CS1000 Powered Speaker
- 2-way speaker system
- Subwoofer with a custom 12? (320mm) long excursion speaker with a 2.5? (64mm) voice coil
- 6 x full-range,? 3? (70mm) neodymium high-efficiency custom woofers with 0.75? (20mm) voice coils
- The frequency response of 40Hz to 20KHz
- Onboard Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively
- Built-in DSP with eight presets to suit every application
- Variable volume between -4.5 / + 5 dB in 8 steps
- Control Panel with master volume, presets, satellite volume, HPF, and LED status
- Input and link via XLR and Neutrik SPEAKON for satellite connection
- Dispersion 110 ? (H) x 30 ? (V)
- Modular design allowing two systems to be configured as one single solution via optional accessories
- Bass reflex stackable subwoofer in a birch plywood enclosure with diecast aluminum handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming
- The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation
- The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted.
- Ideal for both live applications and fixed installations
- Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side)
SKU: FBT CS 1000
